Jeffrey S. Raquet at University of North Carolina at Charlotte

Jeffrey S. Raquet

  • 2.9Overall Quality
  • 2.8Helpfulness
  • 3.1Clarity
  • 3.4Easiness

Number of ratings 54 / Average Grade:  B- Submit a correction

Close


  • Your correction will show after moderators approve it.


Date
Class
Rating
Comment
5/12/14

ENGR 1202

Poor Quality

Easiness3

Helpfulness1

Clarity3

Rater Interest4

Grade ReceivedB-

Dr. Raquet is not the most helpful teacher. He does not stay up to date with grades on moodle. He waited to the last week to put the majority of grades up so I had no idea what my average was until finals. I guarantee he won't respond to emails. You'll learn a lot when it comes to CAD. Dr. Raquet is a nice guy and descent teacher

10/24/13

ENGR-1202

Poor Quality

Easiness2

Helpfulness2

Clarity1

Rater Interest5

Grade ReceivedN/A

If you need clarification or help outside of class, forget it. Dr. Raquet will not answer your emails, office phone calls, or anything else. No office hours posted in syllabus, no email posted in syllabus, absolutely no contact information whatsoever. If you find this info, do not expect a response if you try to contact him.

7/5/13

Megr 3232

Good Quality

Easiness4

Helpfulness3

Clarity5

Rater Interest4

Grade ReceivedN/A

Easy B, kind of hard to get an A. Good Prof. overall

6/25/13

MEGR 2141

Good Quality

Easiness2

Helpfulness5

Clarity5

Rater Interest4

Grade ReceivedN/A

I took this class over the summer.Very challenging, he is a great teacher and willing to answer any question you have,there are three tests worth twenty percent each,final is thirty percent, quizzes and hw are remaining ten percent. Hw is challeing but he goes over every problem until you have a thorough understanding. Said exactly what was on test

5/20/13

MEGR 2141

Good Quality

Easiness2

Helpfulness5

Clarity5

Rater Interest4

Grade ReceivedN/A

Excellent teacher. Answers any questions you may have and does so in great detail. The material is pretty difficult but NOT impossible. If you do all the homework he assigns (and there is a lot), you should be fine. He is a very fair grader too. Most importantly, do NOT fall behind! The material builds on itself as the course progresses. Good Luck!

1/30/13

MEGR2141

Good Quality

Easiness3

Helpfulness4

Clarity5

Rater Interest4

Grade ReceivedN/A

I will be quite honest. The course is not at all easy, he's getting blamed by lazy students. He's a great professor, if you're not the type of engineering student that would ACTUALLY study and instead think you'll pass by just studying the night before then i do not recommend you take him. Plane and simple, you want to be an engineer? TAKE HIM!!

1/20/13

MEGR2141

Good Quality

Easiness2

Helpfulness4

Clarity4

Rater Interest5

Grade ReceivedN/A

Alot of people didn't like him but I didn't find him that bad. He knows Statics really well and the class isn't that hard. In the end it's just a bunch of forces pulling in different directions and you have to use forces and moments to solve for unknowns. Nothing is moving so all the forces and moments = 0. Easy class, not sure why people struggle

12/13/12

MEGR2141

Average Quality

Easiness1

Helpfulness2

Clarity3

Rater Interest4

Grade ReceivedN/A

Do NOT take him! Very smart professor but could't dumb it down enough to actually teach. He never taught but spent whole class reviewing homework assigned the night before that he never taught you how to do in the first place. Tests were ridiculous, too.

12/11/12

MEGR1202

Poor Quality

Easiness5

Helpfulness1

Clarity3

Rater Interest4

Grade ReceivedN/A

The lecture is pointless, do the homework assignment, go to the lab. The class is easy, professor is horrible with posting assignments

7/1/12

MEGR2141

Average Quality

Easiness3

Helpfulness3

Clarity2

Rater Interest5

Grade ReceivedN/A

This summer course took my whole time studying it! It isn't an easy course so keep a hard work! Quizzes are extremely easy. The 3 tests aren't harder than the HW problems. STUDY the HW and similar problems and you should be able to at least pass the course. Final was much harder than the tests and too long. Extra credits are provided in the tests.

6/2/12

MEGR3232

Good Quality

Easiness4

Helpfulness4

Clarity3

Rater Interest4

Grade ReceivedN/A

Plastic was really easy but DO NOT underestimate it or u may easily lose the A. 4 tests and project, 20% each and no final. Tests are MC & short answers & that is why it is easy. The bad thing was that u need to refer to the syllabus to know what to study for each test among a bunch of badly organized files which made studying for exams confusing.

5/22/12

ENGR1202

Poor Quality

Easiness5

Helpfulness2

Clarity2

Rater Interest4

Grade ReceivedN/A

The course is easy! Waaay easier than ENGR 1201! HW are 60% of the course, so never think of missing a single one. Don't try to email him, because he won't respond at all! If you need anything, see him in his office! Though, he is a very knowledgeable professor.

4/26/12

ENGR1202

Poor Quality

Easiness4

Helpfulness1

Clarity3

Rater Interest2

Grade ReceivedN/A

Never returned a single email. Wasn't really a good teacher (more of a show-er). Somewhat helpful in labs, but spends most of the time talking about stuff that has nothing to do with what's going on.

3/29/12

ENGR1202

Average Quality

Easiness3

Helpfulness2

Clarity4

Rater Interest2

Grade ReceivedN/A

Rather dry and boring to listen to. Assignments are pretty fair, however details are very important and not paying attention to them will hurt your grade. Straightforward and relatively easy, nothing exceptional.

7/13/11

MEGR2141

Poor Quality

Easiness4

Helpfulness2

Clarity2

Rater Interest4

Grade ReceivedN/A

Wanted students to learn, just gets a little disorganized getting his points across. Tests, homework, quizzes were easy, gives entirely too short of time on quizzes though. Final was also ramped up compared to the tests/homework/quizzes.

7/11/11

megr1202

Good Quality

Easiness2

Helpfulness3

Clarity4

Rater Interest4

Grade ReceivedN/A

Had him for 1202 and statics. somewhat disorganized. For 1202 had to constantly check moodle for new assignments that would pop up without warning (learned this the hard way by missing a group of assignments). Doesn't return emails. normally pretty easy to find (often in the comp. lab on 3rd floor). Not the best, but would take from him again.

7/5/11

megr2141

Poor Quality

Easiness1

Helpfulness2

Clarity2

Rater Interest4

Grade ReceivedN/A

Rarely responds to e-mail. Absolutely no extra credit. No curve, no sympathy. Arrogant. Expect difficult tests and homework problems. Quizzes are extremely easy compared to tests and homework but count very little. Class could have been made much clearer given better examples and explanation.

3/22/11

MEGRA

Average Quality

Easiness5

Helpfulness3

Clarity3

Rater Interest2

Grade ReceivedN/A

If you are to take him for MEGR1202 he is extremely knowledgeable about the software ProE that you must use during the class. His lectures are optional, but he takes a quiz and ONLY accepts homework at the BEGINNING of class. If you miss the beginning of class he is very strict about no late work. be extremely lazy and make a B, easy class.

7/17/10

megr3090

Good Quality

Easiness4

Helpfulness4

Clarity4

Rater Interest1

Grade ReceivedN/A

This is ADVANCED CAD/CAM. Super easy class w/ a VERY SMALL amount of work to be done compared to 1202. I took it in the summer, 3 weeks of advanced features on ProE and some stuff on GeoMagic (CAM system), a week of lectures on stuff similar to 2180, and the last week on a short-interesting final project and a short quiz.That is an easy A. Take it!

7/6/10

MEGR2141

Poor Quality

Easiness2

Helpfulness1

Clarity2

Rater Interest1

Grade ReceivedN/A

This is the worst professor I have ever came across in my 3 years at UNCC. you'll never learn anything from him,he spends the whole time solving just 1 problem. You are expected to teach yourself in such a HARD class. just KILL to sign up with someone else, like Sharpe. And oh, he failed 3/4, no curve at all,he wouldnt mind failing the whole class

More Engineering professors at University of North Carolina at Charlotte

NAME
TOTAL RATINGS
OVERALL QUALITY
HELPFULNESS
CLARITY
EASINESS
HOT?
Good Quality
56
3.5
3.4
3.7
2.3
Not Hot
Average Quality
47
2.9
3.0
2.9
3.4
Hot
Good Quality
37
4.5
4.5
4.5
4.0
Hot
See full department list